Lunsford 3.5mm “Super Duty” Tekno EB410 Titanium Turnbuckle Set

This is an optional Lunsford 3.5mm “Super Duty” Titanium Turnbuckle Set for the Tekno EB410 4WD Buggy. Lunsford turnbuckles are CNC machined and thread rolled in house from domestic US 6AL/4V grade titanium. If you want to put your car on a diet, this is one of the best places to start eliminating weight, without sacrificing strength. 

The Lunsford Touch:

• Always and only domestic Grade 5 titanium
• Nano accurate threading process
• Machined from center-less ground titanium
• Manufactured right here at the Lunsford compound

Includes:

• (4) 3.5mm x 40mm SUPER DUTY Titanium Turnbuckles (Front Camber & Steering)
• (2) 3.5mm x 55mm SUPER DUTY Titanium Turnbuckles (Rear Camber)
• (1) 1/8″ Drill Bit.
• (1) Super cool Lunsford decal

NOTE: These turnbuckles are 0.5mm larger in diameter than stock adding increased strength. You will need to use the included 1/8″ drill bit to enlarge the Tekno Rod End to accept the 3.5mm SUPER DUTY Turnbuckles. Use a paper clip to measure the depth of the ball end and then mark the drill bit accordingly. We recommend drilling by hand but can also be done with a drill that has a very linear trigger. Safe use of power tools is highly recommended. 

This product was added to our catalog on April 18, 2018